FDA Food Grade Polyurethane PU Potting Compound Low Temperature Resistance For Electronics

(Cruical) FDA Food Grade  PU Potting Compound With Excellent Low-Temperature Resistance                            

BZ-FDA-W is a high-transparency polyurethane material with low-temperature resistance, specifically designed for LED lighting in cold storage facilities.This product meets North American FDA food-grade standards, featuring 5-year UV resistance. It provides excellent adhesion and protection for LED chips and flexible printed circuits (FPC), achieving IP68-level protection. As a high-performance transparent polyurethane potting compound, it delivers superior performance in both transparency and durability.

Key Product Features

1. Two-component polyurethane with convenient process operation and excellent fluidity.
2. Complies with environmental requirements such as ROHS/REACH
3. Complies with North American FDA requirements.
4. Curing can be accelerated by heating, featuring outstanding curing efficiency.
5. Good weather resistance and UV resistance properties.
6. Widely used in LED linear lights, soft light strips, LED lighting fixtures, etc.

Technical Parameters 

Product Applications

1. LED Flexible Strip Light: This model features exceptional flexibility, allowing seamless bending at any angle with strong adhesion. It provides robust protection for LEDs and FPC, while meeting food-grade environmental standards.
2. LED Outdoor Lighting: Resistant to yellowing for up to 5 years, with excellent low-temperature and high-temperature aging resistance, ideal for outdoor use, and features an IP68 waterproof rating.

LED Linear Lights:  Complies with North American FDA requirements. High transparency, and 5-year yellowing resistance enable the lights to perform in more demanding environments.

LED Flexible Strips: It provides robust protection for LEDs and FPC, while meeting food-grade environmental standards.

Directions for Use

1. Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc. 
2. Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.
3. Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.
4. Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.
5. Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.
6. Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.
7. Curing: Allow the potted and inspected products to cure at room temperature or with heat assistance (recommended 60°C if needed), according to product and process requirements.
8. Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

Packing & Shipping & Storage

1. Hardener: Typically 5KG/ 10KG / 20KG metal or plastic drums.
2. Resin: Typically 5KG/ 10KG / 20KG  metal or plastic drums.
3. Store and transport as a general chemical product.
4. Store sealed, protected from light at room temperature. Shelf life varies from 6 to 12 months depending on packaging; please refer to the expiry date on the shipping package.
5. When temperature drops to 15°C or lower, the hardener or resin should be stored in a warm place or heated before use for potting. Specific heating recommendations depend on the temperature drop; please communicate and consult with us.

FAQ

Q1: What are the main features of the Weather-Resistant Transparent Polyurethane Potting Compounds? 

A1: This potting compound offers excellent weather resistance, high transparency, strong adhesion, and durability, making it ideal for protecting electronic components from moisture, dust, and environmental damage.

Q2: Can this potting compound be used for outdoor electronic applications?

A2: Yes, the weather-resistant properties of this transparent polyurethane potting compound make it suitable for outdoor use, providing protection against UV rays, rain, and temperature fluctuations.

Q3: Is the compound easy to apply and cure? 

A3: Yes, the potting compound has good flow characteristics for easy application and typically cures at room temperature, forming a tough and flexible protective layer.

Q4: Does the transparent nature of the compound affect its protective qualities?

A4: No, the transparency of the polyurethane potting compound does not compromise its protective features; it still provides excellent insulation and environmental protection while allowing visual inspection of the encapsulated components.

Q5: What types of electronics are compatible with this potting compound?

A5: It is compatible with a wide range of electronic components, including circuit boards, sensors, connectors, and LED assemblies, especially those requiring clear encapsulation and protection from harsh environmental conditions.