Transparent RTV Silicone Heat Conductive Potting Compound High Temperature 8806-1

High-Temperature Transparent Silicone Potting Compound For Extreme Environments

BZ-8806-1 is a two-component room-temperature-curing silicone potting compound engineered for high-performance protection of LED lighting and electronic devices in extreme environments. With exceptional transparency (≥94% light transmittance), ultra-wide temperature resistance (-50~220℃), and compliance with RoHS and REACH regulations, it provides reliable defense against UV radiation, thermal shock, and moisture. This formula features high electrical insulation (breakdown voltage ≥18 kV/mm) and excellent thermal conductivity (≥0.3 W/m·K), ensuring the longevity and performance of sensitive components in aerospace, automotive, and industrial application

Key Product Features

1. Ultra-high temperature tolerance: Stable performance from -50 to 220℃, withstanding extreme thermal shock in aerospace, automotive, and industrial applications
2. Exceptional transparency: ≥94% light transmittance, ideal for high-power LED lighting and optical display systems
3. Superior UV resistance: GB/T14522-2008 Level 5 rating, providing long-term protection against ultraviolet radiation degradation in outdoor applications
4. Excellent insulation: Breakdown voltage ≥18 kV/mm, volume resistivity 1.25×10¹⁴ Ω·cm for reliable electrical safety
5. Dual compliance: Meets RoHS and REACH regulations for eco-friendly electronic manufacturing
6. Rapid curing: Full cure in 2.5-3.5 hours at room temperature, with a 30-minute pot life for efficient production processes
7. Excellent waterproofing: IPX8-rated waterproof performance, ensuring lights remain clear and fog-free underwater

Technical Parameters

Product Applications

1. High-Power LED Lighting: Encapsulates LED modules, drivers, and heat sinks in streetlights, stadium lights, and automotive headlights, providing thermal management and optical clarity
2. Industrial Electronics: Protects power supplies, motor controllers, and sensors in manufacturing equipment, withstanding extreme temperature fluctuations
3. Aerospace & Automotive Electronics: Seals avionics components, engine control units, and battery management systems against vibration and thermal shock
4. Outdoor Communication Devices: Insulates base stations, satellite receivers, and solar inverters from moisture, dust, and UV radiation
5. Marine Electronics: Encapsulates underwater cameras, sonar systems, and navigation equipment, providing reliable waterproofing and corrosion resistance

Directions for Use

1. Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc.
2. Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.
3. Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.
4. Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.
5. Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.
6. Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.
7. Curing: Allow the potted and inspected products to cure at room temperature , according to product and process requirements.
8. Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

Packing & Shipping & Storage

1. Part A: Typically supplied in 20kg sealed plastic drums.

   Part B: Typically supplied in 5kg sealed plastic drums.

2. Store and transport as a general chemical product.
3. Store sealed, protected from light at room temperature. Shelf life varies from 6 to 12 months depending on packaging; please refer to the expiry date on the shipping package.
4. Store and transport as a general chemical product, Keep out of reach of children.

FAQ:

Q: What are the primary applications of Weather-Resistant Transparent Silicone Potting Compounds?

A: These compounds are ideal for protecting electronic components, outdoor LED lighting, sensors, and other devices exposed to harsh weather conditions due to their excellent weather resistance and transparency.

Q: How does the transparency of this silicone potting compound benefit my project?

A: The transparent nature allows for visual inspection of components after potting, and it does not obstruct light, making it perfect for LED encapsulation and optical applications.

Q: Can this silicone potting compound withstand extreme weather conditions?

A: Yes, it is specifically formulated to resist UV radiation, moisture, temperature fluctuations, and other environmental factors, ensuring long-lasting protection outdoors.

Q: Is this product easy to apply and cure?

A: Yes, the compound has excellent flow properties for easy application and cures at room temperature to form a flexible, durable, and weatherproof seal.

Q: Does the silicone potting compound provide electrical insulation?

A: Absolutely, it offers excellent electrical insulation properties, protecting sensitive electronic components from moisture and contaminants.