High Rigidity Polyurethane Soft Potting Compound Black Potting Epoxy BZ-6906-K

High-Rigidity Polyurethane Potting Compound for Filters                                                                                  

BZ-6906-K is a two-component polyurethane potting compound engineered for structural bonding and sealing of high-efficiency filters, air filters, and oil filters. With rapid room-temperature curing (full cure in 2±1 hours), high Shore D hardness (68±8), and excellent electrical insulation (breakdown voltage ≥20 kV/mm), it provides robust mechanical stability and long-term durability across -40~120℃. Compliant with RoHS regulations, this formula features low water absorption (≤0.5%) and strong adhesion to metal, plastic, and filter media, ensuring leak-proof performance in demanding industrial environments.

Key Product Features

1. Rapid curing: Full cure in 2±1 hours at 25℃; ≤45 minutes with 60℃ heating for flexible production scheduling
2. 1:2 mix ratio: Easy proportioning, minimal material waste, compatible with automated dispensing systems
3. High rigidity: Shore D 68±8 hardness with ≥35% elongation, ideal for structural filter bonding applications
4. Superior insulation: Breakdown voltage ≥20 kV/mm, volume resistivity >1.0×10¹¹ Ω·cm for reliable electrical safety
5. Wide temperature tolerance: Stable performance from -40 to 120℃, suitable for extreme industrial conditions
6. RoHS compliant: Meets international environmental standards for consumer and industrial use
7. Strong adhesion: Bonds tightly to metal, plastic, and filter media, preventing leaks and ensuring long-term product longevity

Technical Parameters 

Product Applications

1. High-Efficiency Filters: Structural bonding of HEPA/ULPA filter frames and media, providing airtight seals and mechanical stability in cleanrooms, hospitals, and data centers
2. Air Filters: Seals automotive cabin filters and industrial HVAC filters, enhancing filtration efficiency by eliminating air bypass around filter edges
3. Oil Filters: Bonds filter media to metal end caps in automotive and industrial oil filters, withstanding high-pressure fluid flow and vibration
4. Industrial Filtration Systems: Seals hydraulic filters, fuel filters, and water treatment filters, resisting chemical exposure and temperature fluctuations
5. Filter Control Modules: Encapsulates sensor circuits and control electronics in smart filter systems, protecting against dust, moisture, and electrical interference

Directions for Use

1. Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc. 
2. Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.
3. Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.
4. Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.
5. Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.
6. Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.
7. Curing: Allow the potted and inspected products to cure at room temperature or with heat assistance (recommended 60°C if needed), according to product and process requirements.
8. Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

Packing & Shipping & Storage

1. Hardener: Typically 5KG/10KG/20KG/200KG metal or plastic drums.
2. Resin: Typically 10KG/20KG/200KG metal or plastic drums.
3. Store and transport as a general chemical product.
4. Store sealed, protected from light at room temperature. Shelf life varies from 6 to 12 months depending on packaging; please refer to the expiry date on the shipping package.
5. When temperature drops to 15°C or lower, the hardener or resin should be stored in a warm place or heated before use for potting. Specific heating recommendations depend on the temperature drop; please communicate and consult with us.